fbpx

New at SU Blog Hop – Elevated Embossing with Layered Florals

Hello and welcome to our New at SU blog hop. This month we are sharing elevated embossing projects with you.

New at SU 2024 Header

Embossing folders are my favourite tools in papercrafting. Why?

  1. It’s quick to create texture with them
  2. They are low cost
  3. There are so many techniques to use with them

I used the Letterpress technique with the Layered Florals 3D Embossing Folder. To achieve this look, I added Lemon Lime Twist ink to the raised side (the one with the Stampin’ Up! logo), by patting my ink pad directly onto the folder. Not moving the cardstock, I re-applied the ink and ran it through the Stampin’ Cut & Emboss Machine (SCEM) a couple of times.

Still with the Cardstock in place, I added Wild Wheat ink with a Blending Brush to sections of the same side. Then I ran it through the SCEM again. This was repeated until I was satisfied with the result. I went around the white space with the Garden Green Watercolour Pencil and blended it lightly with a Water Painter.

I added some Calypso Coral to the smaller flowers with a Sponge Dauber as I felt those needed a different look. The stamens of the larger flowers were accented with the Early Espresso Watercolour Pencil.

Some simple leaves form the focal point as I didn’t want to detract from the lovely embossing folder. A few splatters and a Linen Thread bow coplete this card.

I hope you have enjoyed what I have shared with you and give this technique a try. Please follow our hop through for lots more fun ideas for using your embossing folders.

Product List

Purchase a Starter Kit for $169 and choose $235 of product shipped free to you.

SHOP WITH ME

Shop in Australia with me Online or by contacting me

Rochelle Ph: 0404 255 001 or email: rochelle@stampingflair.com

CUSTOMER APPRECIATION GIFTS

All orders receive a handmade Thank You card and a gift from me. Orders over $75 will qualify for the Crafty Collaborations Tutorial bundle and orders over $90 will also receive the Create with Us Tutorial Bundle.

Please use Host Code for all orders under $250. If your order is over $250 then don’t use the Host Code as you will get your own Stampin’ Rewards.

HOST CODE: DGK73423

CASEing the Catty Challenge CTC472 – Take to the Sky Suite

Caseing the Catty Sunday Challenge, Header

Welcome to the Caseing the Catty Sunday Challenge Blog Hop CTC472. Today’s challenge is to CASE a project from the Take to the Sky Suite in the Stampin’ Up! Annual Catalogue. This suite was the first one I purchased from this catalogue. I loved that it was a masculine themed suite and i really liked the DSP which had some tags and individual images which could be used on projects.

Today, I’ve CASED a technique which is demonstrated on Page 36 of the catalogue with the repeated die cuts used to create an interesting background.

I used the Heartfelt Hexagon punch to create the background, punching out several shapes from Basic White Cardstock, Then I embossed them with the Layered Florals 3D Embossing Folder. These were adhered to a Basic White matte layer.

EMBOSSING FOLDER TECHNIQUE

To replicate the centre DSP panel in the original card, I added another embossed punched hegaxon on top. I coloured the background of this shape with the Light Pool Party Stampin’ Blend. Then I coloured the flowers with Lemon Lime Twist and Peach Pie Stampin’ Blends adding some lighter shading with Granny Apple Green and Calypso Coral Watercolor Pencils.

Instead of having this as an inlaid panel, I mounted this on top of the shape underneath, adding Stampin’ Dimensionals to give it more depth.

The cake from the Attention Shoppers bundle was coloured with Stampin’ Blends. I felt this image looked a bit lost on it’s own so I added some flowers and leaves around it. The floweres were die cut from the Unbounded Beauty Designer Series Paper while the die cut leaves were lightly watercoloured in Lemon Lime Twist for an organic look.

A bow, coloured with the Dark Peach Pie Stampin’ Blend, brings my little cluster of elements together.

Thank you for taking the time to stop by my blog. Next on our hop is my friend Rochelle Blok who will have some beautiful inspiration for you.

Caseing the Catty Sunday Challenge, Next Button

You are invited to join in the challenge by adding your entries to our FB Group (click on the button below to join).

Caseing the Catty Sunday Challenge, Join the Challenge

Purchase a Starter Kit for $169 and choose $235 of product shipped free to you.

SHOP WITH ME

Shop in Australia with me Online or by contacting me

Rochelle Ph: 0404 255 001 or email: rochelle@stampingflair.com

CUSTOMER APPRECIATION GIFTS

All orders receive a handmade Thank You card and a gift from me. Orders over $75 will qualify for the Crafty Collaborations Tutorial bundle and orders over $90 will also receive the Create with Us Tutorial Bundle.

Please use Host Code for all orders under $250. If your order is over $250 then don’t use the Host Code as you will get your own Stampin’ Rewards.

HOST CODE: DGK73423

Product List

Caseing the Catty CTC468 – New Annual Catalogue

Hi friends, Welcome to the Caseing the Catty Sunday Challenge Blog Hop and this is my first week participating as a crew member. I’m thrilled to have been asked to join the Design Team and am thanksful for this opportunity. I’m looking forward to sharing creative inspiration with you as part of the team.

This week’s challenge is to CASE the Annual Catalogue. With so much inspiration throughout the catalogue it’s a tough choice to pick just one!

After much thought and indecision I settled on this gift box from Page 46 which uses the Thoughtful Journey Suite. My inspiration was the gift tag and the tone-on-tone background.

Tag

I started by blending Soft Sea Foam, Lemon Lime Twist, Shy Shamrock, Summer Splash and Wild Wheat on Basic White Cardstock. Then I added some stripes from the Of Art & Texture stamp set which is part of our Online Exclusives range.

I heat embossed some small flowers in White from the Country Birdhouse stamp set around the Cardstock. Using the Radiating Stitches Dies, I cut a rectangle, then repositioned the die to cut out the tag shape.

Caseing the Catty, CTC468, Case the Annual Stampin' Up!, Catalogue, Ephemera, Layere Florals 3D Embossing Folder, diy card, Heat embossed background, Altering your dies using Radiating Stitches Dies

Some elements from the new Ephemera Packs were added to the card, including the sentiment. These packs provide a variety of ready-to-go images and sentiments.

To depict the tone-on-tone background of the gift packaging, I embossed a piece of Basic Beige Cardsstock with the Layered Florals Embossing Folder. I added a narrow matte layer of White behind the embossed layer to tie in with the White Embossing which also added a subtle contrast. This was added to a Basic Beige Cardstock. New to our colour range, this is a must-have in your stash. It’s a beautiful neutral which I love.

Thank you for stopping by and I hope you are inspired to CASE a project from the catalogue and share it over the on the Challenge FB page. Next on our hop is Lauren Meiklejohn. Please follow our hop through for more inspiration.

Purchase a Starter Kit for $169 and choose $235 of product shipped free to you.

SHOP WITH ME

Shop in Australia with me Online or by contacting me

Rochelle Ph: 0404 255 001 or email: rochelle@stampingflair.com

CUSTOMER APPRECIATION GIFTS

All orders receive a handmade Thank You card and a gift from me. Orders over $75 will qualify for the Crafty Collaborations Tutorial bundle and orders over $90 will also receive the Create with Us Tutorial Bundle.

Please use Host Code for all orders under $250. If your order is over $250 then don’t use the Host Code as you will get your own Stampin’ Rewards.

HOST CODE: DGK73423

Product List

Create a Fun Background with a Brayer

Today I’ve got a card on which I’ve combined a few different techniques. I really wanted to use the new Stampin’ Brayer so I started off with a piece of White Cardstock and brayered Tahitian Tide, Parakeet Party and Highland Heather in different directions. For even coverage, make sure you roll the brayer right through when inking it up.

Once I brayered the 3 colours, I die cut a Deckled Circle. On this, I stamped some leaves from the Gorgeously Made stamp set in Tahitian Tide and layered it onto another Deckled Circled die cut from Parakeet Party Cardstock.

The torn floral piece at the bottom was another one of my experimental pieces which I put to use.

To create this look

Ink up the Layered Florals Embossing Folder on the debossed side (side with Stampin’ Up! logo) with Gorgeous Grape ink. Add a piece of Fresh Freesia Cardstock in the folder and run it through your Stampin’ Cut and Emboss Machine. I tore a piece off and layered it with some additional DSP pieces under the sentiment.

The focal image of flowers are from the Irresistible Blooms bundle which is available as part of our Online Exclusives range. If you live in Australia, you can shop all the products I have used on this card in my Online Store or by getting in touch with me. A full list of supplies are below.

Product List

Purchase a Starter Kit for $169 and choose $235 of product shipped free to you.

SHOP WITH ME

Shop in Australia with me Online or by contacting me

Rochelle Ph: 0404 255 001 or email: rochelle@stampingflair.com

CUSTOMER APPRECIATION GIFTS

All orders receive a handmade Thank You card and a gift from me. Orders over $75 will qualify for the Crafty Collaborations Tutorial bundle and orders over $90 will also receive the Create with Us Tutorial Bundle.

Please use Host Code for all orders under $250. If your order is over $250 then don’t use the Host Code as you will get your own Stampin’ Rewards.

HOST CODE: DGK73423